Subframe Arrival

The rear subframe arrived today, the manufacturing of which was arranged by Andy McReady and his contacts at the Rotary Club. This will carry the drive chain including the rear axles and also form the roll hoop and part of the seat.

It's Free!

The Chassis was removed from the jig today and the boys got to work on fettling the edges and cutting the curve at the rear. We can now start with the silk and bioresin composite process in the next week or two.

Epic Update

Well, so much has happened since the last post that I am not sure where to start! First of all we have a new sponsor to thank, Teagle Machinery of Blackwater have very kindly agreed to machine our drive shafts for us and have also volunteered to sort out the bearings for them too for which we are very grateful.

We also had several deliveries over the past couple of weeks, we are now the proud owners of a new motor and race batteries. At the same time the Nu Vinci gearbox arrived, a purchase made possible by the generous funding provided by Ladds of Redruth, a big thank you to them.

 
And finally perhaps the most dramatic piece of news; a major leap taken just before the half term, with the bulkheads finally complete the chassis could be glued together with the bone glue. It was all hands on deck for this with everyone pitching in to get the bone glue on before it cooled and then clamped into the jig.

 

  

 

It's Official

We have now recieved our entry confermation with the date of our heat, it will be on the 24th June 2010. That should give us plenty of time to build and fully test the car before the season starts. The venue is Newquay Airport this year, a new track to us so we will definatly have our work cut out for us! To qualify for Goodwood we have to procure a podium finish which last year was a drive of about 60 miles in 4 hours, a tough task but one that I am sure that we will be more than capable of. On a construction note, the fillets which reinforce the bulkheads are ready to be glued into place using the bone glue which will happen in the next few days so we are still on track for the Christmas deadline for the box chassis.

This Week's Progress

The floorpan and all the bulkheads are now cut, a little sanding and they will be complete. Work has also started on the cedar fillets which will reinforce all the joints. The three way mitres are proving complicated, but after plenty of practice with scrap wood the boys are ready to cut the real ones tomorrow.